FLOOR, WALL & WINDOW DECALS
Skinit offers business decal signs available for floors, walls and windows. All decal signs are made from the industry’s highest quality materials which are safe on surfaces and easy to apply.
Skinit Floor Decals are a premium 3.5 Mil vinyl with printed with aLatex UV Ink then protected with 4.0 Mil clear Laminate to provide ease of installation and removal.Learn More
WALL & WINDOW DECALS
Skinit's Wall and Window decals are made for the highest quality 3M vinyl which is easy and safe to apply on nearly any wall without damaging the surface and won't leave any sticker residue behind.Learn More
SKINIT FLOOR DECALS
Skinit Floor Decals can last up to 3 to 5 years with proper care, but is easily removable for shorter time use. Perfect for warning signed, promotions, advertising and directional needs in the workplace, perfect for long or short term use depending on location, they will remove easily with no residue if removed within 6 to 12 months, but will last up to 5 years and still be easily removed with Minimal residue to clean. Bonds well with Hardwood, Polished concrete, Vinyl, Steel, ABS, wood, Tile (with no grout).Shop All
Floor surface must be clean prior to application of graphics. Traditional floor cleaning methods can be used to prepare the surface. Ensure that the floor surface is adequately dry before application of graphics. [CAUTION: Skinit’s System for Graphic Advertising for Floors can be applied at a temperature as low as 50°F (10°C).]
Peel the backing paper (release liner) 1” down from the top. Fold, and crease the backing paper.
Align and apply the graphic starting at the top using firm strokes with a plastic squeegee, stiff cardboard, or a soft cloth. Continue removing the backing paper and smooth out the squeegee. Re-squeegee the edges of the graphic using firm strokes to ensure edge adhesion.
Do not clean or wax graphics for at least 24 hours after application.
When selecting a floor wax, ensure it meets or exceeds ASTM D 2047 standards for appropriate static coefficient of friction (.5 min)
Avoid damaging graphics by heavy equipment traffic (fork trucks, pallets, or other heavy equipment). CAUTION: To avoid risk of injury, immediately remove graphics if any edge of the graphic lifts, and replace with a new graphic.
Floor Decals are removable not not re-useable to begin to remove Lift one edge of the graphic and pull, using short quick strokes. Pull at an angle less than 45 degrees for best results.
Depending on the installation surface and how long the decal has been installed, there may be some residue left over. Use an adhesive remover that is safe on your surface. You decal should come cleanly off most surfaces up to 6 to 12 months, after this period removability becomes more difficult.
SKINIT WALL & WINDOW DECALS
Removable Intermediate 3M vinyl film with advanced repositionability and Comply™ adhesive for easier, bubble-free application. This white vinyl versatile film is excellent for general signage, POP, walls, Glass trucks, partial vehicle wraps, and carpet graphics. Printed with vibrant UV resistant latex ink and protect with a 3M laminate for up to 7 years of life. Provides slideability, tack and snap-up that graphic installers have come to expect from 3M™ Controltac™ Graphic Films.Shop All
This 3m film is not highly conformable and it not a good choice for complex curves.
Removal may require heat after a period of time.
This pressure activated adhesive on this film offers:
Smooth Sliding into position on a substrate
Fast finger taking to check position; and
Easy Snap-up and repositioning when u need it
SNAP-UP & REPOSITION
This feature is lost when:
Firm pressure with a squeeze or other application tool is applied.
Application temperatures above 100 Degrees F, even if only a light finger pressure was used for tacking.
Any part of the film is removed from the original liner and reapplied to the same or other liner.